找商網手機端：m.zhaosw.com
上海艦邦實業有限公司
主營產品： 黑母粒
㜉㜆㜃㜄㜉㜃㜃㜃㜄㜈㜌
收藏 
德國科萊恩無鹵阻燃劑-EXOLIT-AP462-多磷酸銨類阻燃劑
價格
訂貨量(千克)
￥89.10
≥25
店鋪主推品 熱銷潛力款
聯系人 楊春夏 技術支持銷售工程師 
掃一掃添加商家
㜉㜆㜃㜄㜉㜃㜃㜃㜄㜈㜌
發貨地 上海市寶山區
在線客服
商品參數
|
商品介紹
|
聯系方式
原產國/地區 德國
是否進口 是
型號 科萊恩無鹵阻燃劑 EXOLIT AP462
品牌 科萊恩
用途 多磷酸銨類阻燃劑涂料涂料阻燃劑
有效物質含量 99.8
產品規格 科萊恩無鹵阻燃劑 EXOLIT AP462
主要用途 合成材料阻燃劑
CAS 科萊恩無鹵阻燃劑 EXOLIT AP462
特色服務 提供售前售后技術咨詢服務
產品名稱 阻燃劑
是否危險化學品 否
商品介紹
Exolit AP 462阻燃劑
| Chem. Group: | Ammonium Polyphosphate 多磷酸銨 | Supply Form: | white powder 白色粉末 | CAS-No.: | |||
| Product-No.: | 106961 |
| Product Description |
Exolit AP 462 is a product based on ammonium polyphosphate. The crystal modification is phase II. It is manufactured from Exolit AP 422 by micro-encapsulation with melamine resin according to Clariant’s own method.
Exolit AP 462 is a fine-particle white powder with very low solubility in water, even at elevated temperatures. It is completely insoluble in organic solvents. The product is non-hygroscopic and non-flammable. Exolit AP 462 differs from Exolit AP 422 in the following properties:
ExolitAP 462是一種細顆粒的白色粉末，即使在高溫下，水中的溶解度非常低。
完全不溶于有機溶劑。非吸濕性和非易燃的產品。
Exolit AP 462 不同于Exolit AP 422
marked reduction in water-soluble constituents水溶性成份顯著減少
even lower viscosity in aqueous suspension在水懸浮液里低粘度
lower heat stability in the temperature range > 300 °C，熱穩定性低
lower heat stability in the temperature range > 300 °C，熱穩定性低
improved powder flowability 改進粉末的流動性
| Delivery Specification and Technical Data | ||||
| Characteristics 特性 | Unit | Target value | DS1) TD2) | Test method |
| Chemical Formula 化學式 | [NH4PO3]n n > 1000 | |||
| Phosphorus 磷 | %(w/w) | 29.0 - 31.0 | Photometry after oxidizing dissolution; (11/17) | |
| Water / Moisture 濕度 | %(w/w) | max. 1.0 | Thermogravimetry at 130 °C; (11/03) | |
| Nitrogen 氮 | %(w/w) | 15.0 - 17.0 | Elemental analysis; (11/07) | |
| Density 密度 | g/cm3 | 1.9 | at 25 °C | |
| Bulk Density 容積密度 | g/cm3 | approx. 0.9 | ||
| Viscosity 粘度 | mPa*s | max. 20 | at 25 °C in 10 % aqueous suspension | |
| pH Value 酸堿值 | 6.5 - 8.5 | Potentiometry in 10 % aqueous suspension; (11/12) | ||
| Solubility in Water 水解度 | %(w/w) | max. 0.04 | Gravimetry after filtration of a 10 % aqueous suspension at 25°C; (11/41) | |
| Acid Number 酸值 | mgKOH/g | max. 0.5 | Titration using alkali in 10 % aqueous suspension; (11/11) | |
| Average Particle Size (D50) 平均粒徑 | μm | approx. 20 | ||
| Particle Size Distribution 粒度分布 | %(w/w) | Air jet sieving; (11/02) | ||
| >100 μm | max. 0.2 | |||
) Delivery specification: The product is constantly monitored to ensure that it adheres to the specified values. Test methods: Clariant method numbers 11/xx in brackets.
2) Technical data: The technical data are used solely to describe the product and are not subject to regular monitoring.
2) Technical data: The technical data are used solely to describe the product and are not subject to regular monitoring.
| Applications 應用 | |||||||||||||||
_____ Exolit AP 462 can be used for all applications ammonium polyphosphate is suitable for. In cases where a specific phosphorus content is required to obtain the desired effect, the lower phosphorus content of Exolit AP 462 should be compensated by increasing the amount of product added. Exolit AP 462應用于多磷酸銨。 假設，需要到到預期的效果就必須達到磷含量，低磷含量的Exolit AP 462就得增加用量。 Exolit AP 462 can be used advantageously in intumescent coatings where the ammonium polyphosphate is required to have extremely low water solubility and where lower heat stability at temperatures above 300 °C contributes to more rapid foaming of the coating. Exolit AP 462適用于膨脹型防火涂料，聚磷酸銨有非常低的水溶性和在較低的熱穩定性，當溫度高于300℃時有助于更快速發泡。 _____ Intumescent coatings膨脹型涂料使用 On account of its low water solubility, Exolit AP 462 is particularly suitable as an ”acid donor” for intumescent coatings. Other essential components of intumescent systems include a binder, a carbon donor (e.g. pentaerythritol) and a blowing agent (e.g. melamine). 因其低水溶性，Exolit AP 462適用于膨脹型防火涂料、粘合劑和發泡劑 On exposure to flame, the intumescent coatings form a carbonaceous foam which effectively shields the underlying material from temperature increases. 遇火時，膨脹型防火涂料，能形成碳泡沫，有效地屏蔽了底層材料溫度升高。 Steel structures coated with intumescent paints can meet the requirements of fire resistance classes specified in EN, DIN, BS, ASTM and others. 鋼結構建筑物使用膨脹型防火涂料能夠滿足EN, DIN, BS, ASTM等標準防火的要求。 The application of Exolit AP 462 based intumescent coatings on wood or plastics enables these materials to qualify for Building Material Class B (DIN EN 13501-1). Exolit AP 462膨脹型防火涂料用于木材或塑料，符合德國建筑B級標準(DIN EN 13501-1) Exolit AP 462 imparts a good flame-retardant effect to adhesives and sealants when it is incorporated into the base formulation at the rate of 10 - 20 %. 只需添加10 - 20 % Exolit AP 462就可以在粘合劑和密封劑中達到極佳的阻燃效果。 _____ Polyurethane foams聚胺酯泡沫 Exolit AP 462 is a suitable non-halogenated flame retardant for polyurethane foams. If handling of Exolit AP 462 as a solid is not possible we recommend the dosage of the flame retardant by preparing an Exolit AP 462/polyol-suspension. Because of the low acid number of Exolit AP 462 it is also possible to incorporate this flame retardant in an Exolit AP 462/isocyanate suspension. To prevent the solid from settling the Exolit AP 462 suspensions should be stirred or circulated by pump. Exolit AP 462聚氨酯發泡材可作為合適的無鹵阻燃劑。由于酸值低，即可與多元醇混合， 也可直接，也可與異氰酸酯配成懸浮分散液。為了防止沉降，需要用泵攪拌。 _____ Other applications其它應用 Exolit AP 462 has an excellent flame-retardant effect in cellulose-containing materials such as paper and wood products. With chipboard products the B classification according to DIN EN 13501-1 can be achieved by adding 15 - 20 % Exolit AP 462. Casting resins based on epoxy resins or unsaturated polyester resins achieve the classification UL94-V0 with Exolit AP 462. Exolit AP 462具有極佳的阻燃性，同樣適用于紙制品和木制品。 B級硬紙板的材料只需添加15 - 20 %就能符合DIN EN 13501-1阻燃效果。 充填樹脂（環氧樹脂或不飽和聚酯樹脂）使用Exolit AP 462同樣能符合UL94-V0阻燃效果。
| |||||||||||||||
聯系方式
公司名稱 上海艦邦實業有限公司
聯系賣家 楊春夏 
（QQ：254681505）
（QQ：254681505） 電話 㜄㜇㜉-㜌㜌㜄㜉㜇㜆㜃㜃
手機 㜉㜆㜃㜄㜉㜃㜃㜃㜄㜈㜌
傳真 㜄㜇㜉-㜈㜌㜉㜋㜉㜈㜋㜆
地址 上海市寶山區
聯系二維碼
楊春夏 技術支持銷售工程師
㜉㜆㜃㜄㜉㜃㜃㜃㜄㜈㜌
掃碼查看 掃碼查看
手機掃碼 快速查看
在線客服 
