Simulates 26 AWG PIC as specified in ANSI T1.417
Bandwidth to 4.5 MHz
8 channels per line module
Channel 1: loop lengths programmable from 0 to 31,750 ft in 250-ft increments
Channel 2 - 8: loop lengths programmable from 0 to 30,000 ft in 2,000-ft increments
Plugs into our Model 458-CC-16 (16-slot) or 458-3SLB (3-slot) chassis
Channel-to-channel isolation up to 90dB
Ability to open loop at either end of any channel

仿真系統可以對電路的功能行為進行模擬,而不需要建立實際的電路(這過程可能繁瑣而昂貴),因此它是一種很有實用價值的工具。

網絡損傷測試儀的使用可以大地降低網絡管理員故障排查網絡故障的時間,可以提供綜合施工人員的工作效率。還可以加速工程項目的進度和工程質量。

Type of Wire: 26 AWG
Number of Lines: 8- or 12-line options
Reach: 0, 250 ft to 15 kft
Variable Reach per Line: 250ft increments to 4 kft, 500ft increments from 4 kft to 15 kft
Increments: Variable depending on length setting
Bandwidth: 20KHz to 30MHz
DC Rating: 100 VDC Max. Tip-to-Ring
Attenuation (Insertion Loss): MAE < 1dB (20KHz to 30MHz) Typically simulation vs. theory
Channel To Channel Accuracy: MAE < 0.5 dB to ensure repeatable performance between channels
Usable Attenuation Range: 0 to–90 dB
Impedance: ± 10% (20KHz - 30MHz)
Control Remote control: via RS-232
Connections Shielded: RJ-45 jacks to minimize crosstalk