金屬磚紋覆膜板裝配一體式衛浴內墻面板PVC覆膜板衛生間浴室柜墻板
金屬磚紋覆膜板裝配一體式衛浴內墻面板PVC覆膜板衛生間浴室柜墻板
金屬磚紋覆膜板裝配一體式衛浴內墻面板PVC覆膜板衛生間浴室柜墻板
金屬磚紋覆膜板裝配一體式衛浴內墻面板PVC覆膜板衛生間浴室柜墻板
金屬磚紋覆膜板裝配一體式衛浴內墻面板PVC覆膜板衛生間浴室柜墻板
金屬磚紋覆膜板裝配一體式衛浴內墻面板PVC覆膜板衛生間浴室柜墻板

金屬磚紋覆膜板裝配一體式衛浴內墻面板PVC覆膜板衛生間浴室柜墻板

價格

訂貨量(米)

¥30.50

≥3600

¥26.10

≥14100

聯系人 蘇先生 銷售總監

掃一掃添加商家

莸莾莶莹莻莻莺莺莸获莶

發貨地 廣東省
進入商鋪
掃碼查看

掃碼查看

手機掃碼 快速查看

在線客服

商品參數
|
商品介紹
|
聯系方式
是否進口
材質 DX51D
貨號 WQ-ZJ-木紋
產地 佛山
倉庫 樂從細海工業區
計重方式 過磅
質量等級
用途范圍 衛浴內墻/衛生間浴室柜墻板
加工服務 定制樣品,深加工(沖壓、折彎等)粗加工(開平、分條等)其他加工服務
配送服務 可配送到廠
產品表面描述 涂鍍
覆膜紋路 磚紋
商品介紹

發票說明:本店標價,都是不包括稅點;開票另加稅點,詳細咨詢客服!

注:關于本產品標題,由于商品標題搜索功能的特性,為方便采購方的購物搜索,所起標題關鍵詞僅適用于搜索功能,不涉及廣告宣傳和功能描述。

溫馨提示:由于現貨市場浮動較大,店鋪所有規格均為參考價格,具體報價請咨詢客服,謝謝!


vcm覆膜板是先將vcm板送入金屬基板加熱裝置內加熱至180° C高溫,然后立即將VCM裝飾膜送入上下覆合輥中間,利用上下覆合輥的壓力和高溫,

使vcm板裝飾膜熱熔到金屬基板上,牢固地在一起,并將VCM裝飾膜置于上下覆合輥中間,利用上下覆合輥的壓力和高溫,

使vcm板裝飾膜的熱熔牢固。磚紋覆膜板采用高溫壓制復合而成,其致密、強度高,韌性強。靜態彎曲強度比木材高一倍以上。覆膜寬,

接合部位少,與鋁鋼模板相比,支撐和拆卸的速度要快很多。與此同時,它的建設成本也比較低,能有效地縮短工期。此外,這種材質更輕便,

剪釘性能更好,因此使用起來非常方便,速度也會更快。磚紋覆膜板的耐水性很強,在制造過程中,層板都用酚醛樹脂,然后熱壓,

所以面板使用后不易變形。與此同時,它的熱導率遠低于鋼膜,所以在夏季和冬季均可正常施工。就周轉率而言,

覆膜板比一般的建筑模板要高得多,其整體周轉率可達18倍左右。很明顯,這類材料的應用范圍非常廣泛,不管是剪力墻、地鐵、立交橋、

隧道或其他類型的建筑。

The vcm coating board is to first heat the vcm plate into the metal substrate heating device to 180 C high temperature,

and then immediately send the VCM decorative film into the middle of the upper and lower covering roller,

using the pressure and high temperature of the upper and lower covering roller, the vcm plate decorative film hot melt to the metal substrate, firmly together,

and the VCM decorative film in the middle of the upper and lower covering roll,

using the pressure and high temperature of the vcm plate decorative film heat melt firmly.Brick grain covered film plate is made of high temperature pressure composite, its dense, high strength, strong toughness.Static bending strength is more than twice as high as that of wood.Wide film cover, less joints,

support and disassembly speed is much faster than aluminum steel formwork.At the same time, its construction cost is also relatively low,

which can effectively shorten the construction period.In addition, the material is lighter and has better nail cutting performance,

so it is very convenient to use and is faster.The water resistance of brick grain coated plate is very strong. In the manufacturing process,

the laminate is made of phenolic resin, and then hot pressure, so the panel is not easy to deform after use.At the same time,

its thermal conductivity is much lower than the steel film, so it can be constructed normally in both summer and winter.In terms of the turnover rate,

the coated plate is much higher than the general building formwork, and its overall turnover rate can reach about 18 times.

It is clear that such materials are widely used, whether it is shear walls, subways, overpasses, tunnels, or other types of buildings.

聯系方式
公司名稱 佛山市萬慶物資有限公司
聯系賣家 蘇先生 (QQ:1023870619)
電話 莵莽莻莽莹莶莸莵莻莵莾莽
手機 莸莾莶莹莻莻莺莺莸获莶
傳真 莵莽莻莽-莹莶莸莵莻莵莸莽
地址 廣東省
聯系二維碼