E-Sampler 雙環境監視器/采樣器
我們的 E-SAMPLER 是功能**豐富的光散射氣溶膠監測儀。無論您的監測需求是什么,E-sampler 都將提供準確、可靠和相關的數據。
雙環境監視器采樣器操作/界面
E-SAMPLER 堅固耐用、高度便攜且易于使用。全鋁外殼不僅堅固耐用,而且通過過濾潛在的射頻干擾提供電子穩定性。使用 EX-905 三腳架使用的快速連接系統,安裝起來很容易。對于其他安裝應用,提供了用于固定到任何結構的孔。只需打開顯示器,即可使用**新參數開始采樣。該裝置將繼續運行,直到用戶干預或電池故障。Auto-Zero 和 Auto-Span 確保收集的數據具有**質量。Zero 和 Span 都可以手動操作,也可以在不同的時基(15 分鐘到 24 小時)單獨編程。E-SAMPLER 還可以配置啟動/停止時間、記錄周期、平均時間和其他參數。
雙環境監視器采樣器數據采集
可選的 Air Plus 是一個完整的通信數據收集和數據報告工具。該軟件支持用于數據收集的蜂窩數據調制解調器、無線電或直接連接通信,并根據記錄的數據生成摘要報告和圖表。Comet 軟件包含在每個采樣器中,提供對 E-Sampler 數據的易于使用的終端訪問。
雙環境監視器采樣器特征
可編程自動歸零和自動量程
自動量程(1 至 65000 μm/m3)
自動流量控制協議
內置電池(不帶加熱器運行 30 小時,帶加熱器運行 10 小時。)
激光二極管精密光學引擎
集成 47mm 分析濾光片
環境壓力和溫度
內部數據記錄器
PM 10 , PM 2.5 , PM 1 , TSP 監控
鋁制防水外殼
吹掃空氣保護光學元件
完全獨立
無需工具更換過濾器
雙技術
E-SAMPLER 是一種雙重技術儀器,將無與倫比的光散射實時測量與濾光片方法的精度標準相結合。簡單的過濾器加載過程證明了這兩種技術的無縫融合。過濾器可以在不到一分鐘的時間內取出和更換,過濾介質可以根據實驗室分析選擇。由于 MetOne 實際流量控制協議,過濾器上的顆粒負載不會降低性能。環境溫度和壓力被測量,實際流量由 E-SAMPLER 微處理器計算和控制,不受過濾器負載變化的影響。
雙環境監視器采樣器原則
E-SAMPLER 通過近前向光散射提供實時顆粒物測量。一個內部旋轉葉片泵以 2 LPM 的速度將空氣吸入傳感室,然后通過可見激光。空氣中的氣溶膠與空氣中的顆粒負載成比例地散射光。散射光由精確的玻璃光學器件收集并聚焦在 PIN 二極管上。堅固耐用的先進電子設備測量聚焦光的強度并將信號輸出到 CPU。輸出與濃度大于 65,000 ug/m3 呈線性關系。每個 E-SAMPLER 都經過工廠校準。
雙環境監視器采樣器維護
每個 E-SAMPLER 都有兩個內部過濾器(不是 47mm 分析過濾器),以保護敏感的光學元件并防止損壞流量組件。兩個過濾器都可以從前面板訪問。硬幣槽使這些過濾器無需任何工具即可拆卸、檢查或更換。在**惡劣的條件下,兩者的過濾器壽命都將超過 1 年。所有 E-SAMPLERS 都從內部過濾器中吹掃空氣,這些過濾器不斷地遮蔽光學元件。這種吹掃空氣保護允許 E-SAMPLER 在惡劣環境中使用而不會降低性能。即使在惡劣的條件下,E-SAMPLER 也可以按照規范運行 2 年,無需重新校準。
雙環境監視器采樣器應用:
環境監測
粉塵監測
環境監測
圍欄監控
采礦和礦石加工
工業設施和過程監控
應急響應
中文內容來自機器翻譯,內容僅供參考,實際內容可參考原廠介紹或以合同為準。
英文原文:
E-Sampler Dual Ambient Monitor/Sampler
Our E-SAMPLER is the most feature-packed light-scatter Aerosol Monitor available. Whatever your monitoring needs, the E-sampler will provide accurate, dependable and relevant data.
OPERATIONS / INTERFACE
The E-SAMPLER is rugged, highly portable and easy to use. The all aluminum enclosure is not only rugged but provides electronic stability by filtering potential RF interference. Set-up is a snap with the quick connect system used with the EX-905 tripod. For other mounting applications, holes are provided to fasten to any structure. Simply turning the monitor on will start sampling using the most recent parameters. The unit will continue to operate until user intervention or battery failure. Auto-Zero and Auto-Span ensure that the data collected will be of the highest quality. Both Zero and Span can be operated manually or individually programmed at varying time bases (15 minutes to 24 hours). The E-SAMPLER can also be configured for start/stop times, recording periods, averaging time and other parameters.
DATA COLLECTION
Optional Air Plus is a complete communications data collection and data reporting tool. This software supports cellular data modem, radio, or direct connection communication for data collection and generates summary reports and graphs from the recorded data. Comet software, included with each sampler, provides easy to use terminal access to the E-Sampler data.
FEATURES
Programmable Auto-Zero & Auto Span
Auto-ranging (1 to 65000 μm/m3)
Automatic Flow Control Protocol
Internal Battery (30 Hours Operation without heater & 10 Hours with heater.)
Laser-Diode Precision Optical Engine
Integral 47mm Analysis Filter
Ambient Pressure and Temperature
Internal Datalogger
PM10, PM2.5, PM1, TSP Monitoring
Aluminum Weatherproof Enclosure
Purge-Air protected Optics
Completely Self-Contained
No Tools Filter Replacement
DUAL TECHNOLOGY
The E-SAMPLER is a dual technology instrument that combines the unequaled real-time measurement of light scatter with the accuracy standard of filter methods. The simple filter loading process testifies to the seamless blending of both technologies. Filters can be extracted and replaced in less than one minute, and the filter medium can be selected based on laboratory analysis. Particulate loading on the filter does not reduce performance due to the MetOne actual flow control protocol. Ambient temperature and pressure are measured, and actual flow is calculated and controlled by the E-SAMPLER microprocessor independent of filter loading change.
PRINCIPLE
The E-SAMPLER provides real-time particulate measurement through near-forward light scattering. An internal rotary vane pump draws air at 2 LPM into the sensing chamber, where it passes through visible laser light. Aerosols in the air scatter light in proportion to the particulate load in the air. The scattered light is collected by precise glass optics and focused on a PIN diode. Rugged state-of-the-art electronics measure the intensity of the focused light and output a signal to the CPU. The output is linear to concentrations greater than 65,000 ug/m3. Every E-SAMPLER is factory calibrated.
MAINTENANCE
Each E-SAMPLER has two internal filters (not the 47mm Analysis Filter) to protect sensitive optics and prevent damage to the flow components. Both filters are accessible from the front panel. Coin slots enable these filters to be removed and checked or replaced without any tools. Filter life for both will exceed 1 year in the harshest of conditions. All E-SAMPLERS have purge air from the internal filters that continually curtain the optics. This purge air protection allows the E-SAMPLER to be used in adverse environments without performance degradation. Even in harsh conditions, the E-SAMPLER will operate to specifications for 2 years without the need for recalibration.
APPLICATIONS:
Ambient Monitoring
Dust Monitoring
Environmental Monitoring
Fenceline Monitoring
Mining & Ore Processing
Industrial Facility & Process Monitoring
Emergency Response
價格僅供參考,最終采購價格需按簽訂合同為準。