1、全封閉機體,無漏水、漏渣、漏漿現象.
2、整機穩定性能好,噪音低。
3、可一次完成渣、漿分離,淀粉純凈,渣內不含渣皮、渣塊、丁狀物。
4、節約耗材,自動進薯、破碎、分離、排漿、排渣。
5、刺輥帶水工作,縮短了渣粉漿空氣中的氧化反應,提高淀粉純白度。
6、漿渣分離度98以上,殘渣含粉率2左右.
Residue slurry separation potato cassava starch m achine sweet potato washing potato feeding m achine double barrel sweet potato crushing filter residue double barrel sweet potato crushing filter
Pulp residue separation type potato starch m achine grinding sweet potato lotus root pulverizer potato sweet potato Pueraria grinder
1. Fully enclosed body, no water leakage, slag leakage, slurry leakage
2. The whole m achine has good stability and low noise.
3. It can complete the separation of slag and pulp at one time, the starch is pure, and there is no slag skin, slag block and sm all substance in the slag.
4. Saving consum ables, aut o m atic feeding, crushing, separation, slurry discharge, slag discharge.
5. The air oxidation reaction of slag slurry was shortened and the whiteness of starch was improved.
6. The separation degree of pulp and slag is above 98 and the powder content of residue is about 2

該機集鮮薯的粉碎、多級分離于一體,粉碎和分離連續進行,避免了淀粉提取過程中的氧化褐變,生產出的淀粉潔白細膩,用該淀粉加工的粉制品色澤潔白光亮透明,較普通粉品價值倍增。
粉碎細而均勻,淀粉游離率高。粉碎部件采用國家-刺釘輥,將鮮薯通過高速旋轉的輥子刨碎成絲片狀,且細渣較少,不堵塞網孔,有利于淀粉的提取,同時釘刺鋒利耐磨、不需沖(鍛)輥子,作業的連續性。
1、整機安裝應平穩,傾斜角度不大于10度。
2、地式安裝, 好要固定好底腳螺栓,機器運轉平穩。
3、采用單項電機,電源線應是4平方銅芯線。
薯類打粉機維護保養:
1、使用機器時內部要加水。
2、檢查加工物料是否干凈,無雜物;啟動機器,檢查供水系統是否供水。
3、每次工作結束后,應將機器清洗干凈,軸承加注黃油。
家用淀粉機工藝流程:
一,該機集鮮薯的粉碎,多級分離于一體、粉碎和分離連續進行,避免了淀粉提取過程中的氧化褐變,生產出的淀粉潔白細膩,用該淀粉加工的粉制品色澤潔白,光亮透明。在同樣普通粉品價值倍增。
二,粉碎細而均勻,淀粉游離率高。粉碎部件采用國家-刺釘輥,將鮮薯通過高速旋轉的輥子刨碎成絲狀,且細渣較少,不堵塞網孔,有利于淀粉的提取,同時釘刺鋒利耐磨,用戶可以連續作業。
The m achine integrates sm ashing and multi-stage separation of fresh potato into one. The grinding and separation are carried out continuously. The oxidized browning in the process of starch extraction is avoided. The produced starch is white and delicate. The powder products processed with this starch are white, bright and transparent, and their value is doubled compared with ordinary flour products.
The powder is fine and uniform, and the free rate of starch is high. The comminution part adopts the national nail roller. The fresh potato is sliced into silk flakes through the high-speed rotating roller, and the fine slag is less, which does not block the mesh, which is conducive to the extraction of starch. At the sa me time, the nail thorn is sharp and wear-resistant, and there is no need to punch (forge) the roller, so as to ensure the continuity of operation.
1. The installation of the whole m achine should be stable and the inclination angle should not be greater than 10 degrees.
2. Ground type installation, good to fix the foot bolt, to ensure the smooth operation of the m achine.
3. Single motor shall be adopted, and the power line shall be 4 square copper core wire.
Maintenance of potato flour beater:
1. When using the m achine, add water inside.
2. Check whether the processed m aterials are clean and free of foreign m atters; start the m achine and check whether the water supply system is supplied with water.
3. After each work, the m achine should be cleaned and the bearing should be filled with grease.
Process flow of household starch m achine:
1、 The m achine integrates the sm ashing and multistage separation of fresh potatoes, and the continuous grinding and separation can avoid the oxidative browning in the process of starch extraction. The produced starch is white and delicate, and the powder products processed with the starch are white and transparent. In the sa me common powder value doubled.
2、 The powder is fine and uniform, and the free rate of starch is high. The comminution part adopts the national nail roller, which grinds the fresh potato into fila ments through the high-speed rotating roller, and has less fine slag, does not block the mesh, is conducive to the extraction of starch, and the nail thorn is sharp and wear-resistant, so as to ensure the continuous operation of users.
歡迎來電咨詢或到廠考察試機聯系電話1314610089