

萊恩泵閥制造(珠海)有限公司
店齡6年 ·
企業認證 ·
廣東省珠海市
手機掃碼查看 移動端的落地頁
進口電動保溫調節閥德國洛克產品介紹
價格
訂貨量(臺)
¥2600.00
≥1
店鋪主推品 熱銷潛力款
祺祷祵祶祳祺祵祴祸祵祴
在線客服

萊恩泵閥制造(珠海)有限公司
店齡6年
企業認證
聯系人
葉工
聯系電話
祺祷祵祶祳祺祵祴祸祵祴
經營模式
生產商,
所在地區
廣東省珠海市
- 基本信息
- 工作壓差:1.6~6.4Mpa
- 適用介質:水
- 壓力環境:常壓
- 品牌:德國洛克
- 介質溫度:-17~+250℃℃
- 貨號:20204201
- 型號:DE LOCKE
- 驅動方式:電動
- 外型尺寸:中型
- 用途:調節
進口電動保溫調節閥德國洛克產品介紹
進口電動保溫調節閥產品參數:
公稱通徑(DN):20-300mm
閥座直徑(dn):20-300mm
公稱壓力(MPa) :1.6-6.4Mpa
閥蓋形式 標準型(-17~+250℃)、高溫型(+250~+450℃)、低溫型(-40~-196℃)、波紋管密封型(-40~+350℃)
壓蓋形式 螺栓壓緊式
閥芯形式 單座式、套筒式
流量特性 等百分比、快開特性
配置執行器類別 3810系列、PSL系列等電動執行器(客戶*品牌亦可)
執行器參數 電源電壓:220V、輸入信號:4-20mA或1-5V?DC、輸出信號:4-20mA?DC
防護等級:相當IP65、隔爆標志:ExdⅡBT4(ExdⅡBT6特殊定制)、手操功能:手柄
環境溫度:-25~+70℃、環境濕度:≤95%
Imported electric insulation control valve product parameters:
Nominal diameter (DN): 20-300 mm
Valve seat diameter (DN): 20-300 mm
Nominal pressure (MPA): 1.6-6.4mpa
The valve covers are standard (- 17 ~ + 250 ℃), high temperature (+ 250 ~ + 450 ℃), low temperature (- 40 ~ - 196 ℃), bellows seal (- 40 ~ + 350 ℃)
Gland type bolt compression type
The valve core is single seat type and sleeve type
Flow characteristics equal percentage, quick opening characteristics
Configuration actuator category 3810 series, PSL series and other electric actuators (customers can also specify the brand)
Actuator parameters: power supply voltage: 220 V, input signal: 4-20 mA or 1-5 v? DC, output signal: 4-20 ma? DC
Protection grade: equivalent to IP65, flameproof sign: Exd Ⅱ BT4 (Exd Ⅱ BT6 special custom), manual function: handle
Ambient temperature: - 25 ~ + 70 ℃, ambient humidity: ≤ 95%
進口電動保溫調節閥零件材料:
閥體 WCB 304 316 316L
墊片 PTFE\石墨墊片 PTFE\石墨墊片 PTFE\石墨墊片 PTFE\石墨墊片
閥座/套筒 304 304 316 316L
閥芯 304 304 316 316L
導向套/并帽 304 304 316 316L
中墊 PTFE\石墨墊片 PTFE\石墨墊片 PTFE\石墨墊片 PTFE\石墨墊片
閥蓋 WCB 304 316 316L
閥桿 304 304 316 316L
保溫夾套 25 304 316 316L
填料 PTFE/石墨 PTFE/石墨 PTFE/石墨 PTFE/石墨
螺栓 25 不銹鋼 不銹鋼 不銹鋼
填料壓蓋 WCB 304 316 316L
進口電動保溫調節閥產品簡介:
德國洛克《DE LOCKE》進口電動保溫調節閥—Electric Insulation control valve,采用智能一體化電裝,采用帶夾套保溫的閥體,適用于需要保溫的易凝固結晶的介質的壓力,溫度,流量的調節。當工藝介質的結晶溫度低于環境溫度或流體溫度降低,造成粘度增加或流體出現凝固時,這時在閥體和上閥蓋處增設蒸汽保溫夾套裝置,使工藝介質滿足過程控制的需要。電動保溫調節閥閥芯采用上導向結構,閥結構緊湊,有呈S流線型的通道,使其壓降損失小,流量大,可調范圍廣,流量特性精度高,符合IEC534-2-1976標準。進口電動保溫調節閥配以3810系列(PSL系列)電子式電動執行器及低流阻調節閥閥體組成,電動執行機構為一體化結構,內有伺服放大器,輸入控制信號(4-20mADC或1-5VDC)及電源即可控制閥門開度,達到對壓力、流量、液位、溫度等工參數的調節。電動保溫調節閥的泄漏量符合ANSI B16.104標準。
Introduction of imported electric insulation control valve products:
The electric insulation control valve imported from German Rockwell "de Locke" adopts intelligent integrated electric device and valve body with jacket insulation, which is suitable for adjusting the pressure, temperature and flow of the medium that needs insulation and is easy to solidify and crystallize. When the crystallization temperature of the process medium is lower than the ambient temperature or the temperature of the fluid decreases, resulting in the increase of viscosity or the solidification of the fluid, a steam insulation jacket device is added at the valve body and the upper valve cover to make the process medium meet the needs of process control. The valve core of the electric thermal insulation control valve adopts the upper guide structure, the valve structure is compact, and there is a s-streamline channel, so that the pressure drop loss is small, the flow rate is large, the adjustable range is wide, and the flow characteristic accuracy is high, which meets the iec534-2-1976 standard. The imported electric insulation control valve is composed of 3810 series (PSL Series) electronic electric actuator and low flow resistance control valve body. The electric actuator is an integrated structure with servo amplifier. The valve opening can be controlled by inputting control signal (4-20madc or 1-5vdc) and power supply to achieve the adjustment of pressure, flow, liquid level, temperature and other parameters. The leakage of electric insulation control valve meets the ANSI b16.104 standard.
進口電動保溫調節閥訂貨須知:
A、若訂貨前還未選定型號,請向我們提供您的使用參數:
1.公稱通徑 2.產品型號 3.流體性質(包括公稱壓力、溫度、介質) 4.閥體、密封材料 5.連接方式
B、若已經由設計單位選定我公司的產品型號,請按型號直接向我司銷售部訂購
C、當使用的場合非常重要或管路比較復雜時,請您盡量提供設計圖紙和詳細參數,由我們德國洛克閥門技術員為您審核把關。
D、感謝您訪問我公司的網站〖〗,如有任何疑問.
您可以致電給我們《》我們一定會盡心盡力為您提供優質的服務!
