
進口調壓閥德國洛克品牌物美價廉
價格
訂貨量(臺)
¥2100.00
≥1
店鋪主推品 熱銷潛力款
専將專尃射専專尅尊專尅
在線客服

萊恩泵閥制造(珠海)有限公司
店齡6年
企業認證
聯系人
葉工
聯系電話
専將專尃射専專尅尊專尅
經營模式
生產商,
所在地區
廣東省珠海市
- 基本信息
- 品牌:德國洛克
- 型號:DE LOCKE
- 驅動方式:自力式
- 介質溫度:5~60℃℃
- 工作壓差:1.6Mpa
- 適用介質:水
- 壓力環境:常壓
- 貨號:20204201
- 用途:調壓
- 外型尺寸:中型
進口調壓閥德國洛克品牌物美價廉
進口調壓閥性能范圍:
原理:加壓過濾
用途:氣體過濾
樣式:筒式
性能:精密過濾、高效過濾
適用對象:過濾器
有效過濾面積:0.5-8.5kgf/cm2(m2)
主體材質:不銹鋼
適用范圍:輕工
公稱通徑:DN G1/4
過濾器類型:管式
工作介質:空氣
接管口徑:NPT1/4
可調壓力范圍:0.05-0.85Mpa(7-121psi)
*可調壓力:0.95Mpa(135psi)
保證耐壓力:1.5Mpa(213psi)
工作溫度:5~60℃
Performance range of inlet pressure regulating valve:
Principle: pressure filtration
Application: gas filtration
Style: cylinder
Performance: precision filtration, high efficiency filtration
Applicable object: filter
Effective filtration area: 0.5-8.5kgf/cm2 (M2)
Main material: stainless steel
Scope of application: Light Industry
Nominal diameter: DN G1 / 4
Filter type: tubular
Working medium: air
Nozzle diameter: npt1 / 4
Adjustable pressure range: 0.05-0.85mpa (7-121psi)
Maximum adjustable pressure: 0.95mpa (135psi)
Guaranteed pressure resistance: 1.5MPa (213psi)
Working temperature: 5 ~ 60 ℃
進口調壓閥產品概述:
德國《DE LOCKE》洛克進口調壓閥又稱減壓閥,減壓閥的工作原理如下:高壓介質通過一個小孔充到一個相對較大的腔里實現減壓,實際上是靠截流減壓,膜片或活塞的兩面一面是出口腔,一面是人為給的壓力,并且控制小孔大小的閥桿和膜片(活塞)相連,這樣只要給一個固定的壓力,那么出口腔的壓力就會一直等于這個壓力,這個認為給定的壓力可以有彈簧或氣源或液壓源來提供。
Overview of imported pressure regulating valve products:
German de The working principle of the pressure reducing valve is as follows: the high pressure medium is filled into a relatively large cavity through a small hole to achieve pressure reduction. In fact, the pressure is reduced by cutting off the flow. One side of the diaphragm or piston is the outlet, and the other side is the artificial pressure. The valve rod controlling the size of the small hole is connected with the diaphragm (piston), so as to provide a fixed pressure Then the pressure of the mouth will always be equal to this pressure. It is believed that the given pressure can be provided by spring, air or hydraulic source.
