
進口內螺紋管道阻火器德國洛克供應各種規格
價格
訂貨量(臺)
¥3500.00
≥1
店鋪主推品 熱銷潛力款
莸莾莶莹获莸莶莻莼莶莻
在線客服
- 基本信息
- 品牌:德國洛克
- 型號:DE LOCKE
- 驅動方式:自動
- 介質溫度:-20℃~425℃℃
- 工作壓差:1.0Mpa-16.0Mpa
- 適用介質:水
- 壓力環境:常壓
- 貨號:20204201
- 用途:阻火目的
- 外型尺寸:中型
進口內螺紋管道阻火器德國洛克供應各種規格
進口內螺紋管道阻火器產品性能:
1、公稱通徑:DN15-DN50
2、公稱壓力:1.0Mpa-16.0Mpa
3、適用溫度:-20℃~425℃
4、連接方式:內螺紋連接
5、閥體材質:鑄鋼、碳鋼、不銹鋼
6、適用介質:汽油、煤油、輕柴油、笨、甲笨、原油、瓦斯、乙炔、氧氣、氮氣、天然氣、沼氣等。
進口內螺紋管道阻火器產品特點:
1、耐燒性能合格,耐燒試驗1小時無回火現象。
2、阻爆性能合格,阻火器連續13次以亞音速火焰試驗,每次都能阻止火焰的通過。
3、殼體水壓試驗合格,水壓試驗2.4MPa無滲漏。結構合理,重量輕、耐腐蝕。
4、阻火器芯子采用不銹鋼材料, 耐腐蝕易于清洗。
進口內螺紋管道阻火器產品概述:
德國《DE LOCKE》洛克進口內螺紋管道阻火器是指裝在可燃易燃氣體官道上,采用不銹鋼材質,用來阻止易燃氣體、液體的火焰蔓延和防止回火而引起爆炸的安全裝置.通常裝在輸送或排放易燃易爆氣體的儲罐和管線上.(作用是防止外部火焰竄入存有易燃易爆氣體的設備、管道內或阻止火焰在設備、管道間蔓延.阻火器是應用火焰通過熱導體的狹小孔隙時,由于熱量損失而熄滅的原理設計制造.阻火器的阻火層結構有礫石型、金屬絲網型或波紋型.)
阻火器通常安在爐前的燃料氣主管線上,它通常是一段直徑比燃料氣管線粗、兩頭帶法蘭的短管,在管內與氣流垂直安入著十片左右的銅絲網,一般用一定厚度的鑄鋁環將網片周邊壓緊并形成一定間隔.由于銅網的散熱性能極好,當火焰遇到銅網后因溫度劇降而熄火,從而起到阻火的作用.
進口管道阻火器廣泛應用于加熱燃料氣、天然氣、石油液化氣的管路上及油氣回收、煤礦瓦斯排放、氣體分析等系統,能有效地保證氣體管道及氣體使用點的安全運行。
Introduction of imported internal thread pipeline flame arrester products:
German de Lock "lock inlet internal thread pipe flame arrestor refers to the safety device installed on the combustible gas official road and made of stainless steel, which is used to prevent the flame spread of flammable gas and liquid and prevent explosion caused by tempering. It is usually installed on the storage tank and pipeline for transporting or discharging flammable and explosive gas. (the purpose is to prevent the external flame from flowing into the equipment and pipeline containing inflammable and explosive gas Flame arrester is designed and manufactured by using the principle of flame passing through the narrow pores of thermal conductor and extinguished due to heat loss. The flame arrester has gravel type, wire mesh type or corrugated structure
Flame arresters are usually installed on the main fuel gas pipeline in front of the furnace. It is usually a short pipe with a diameter larger than the fuel gas pipe line and two ends with flange. In the pipe, about ten pieces of copper wire mesh are vertically installed in the pipe and the air flow. Generally, the surrounding of the mesh is compressed and formed with a certain thickness of cast aluminum ring to form a certain interval. Because of the excellent heat dissipation performance of copper mesh, when the flame encounters copper mesh, it will be extinguished due to the sharp temperature drop, So as to play the role of fire resistance
Imported pipeline flame arresters are widely used in heating fuel gas, natural gas, liquefied petroleum gas pipelines and oil and gas recovery, coal mine gas emission, gas analysis and other systems, which can effectively ensure the safe operation of gas pipelines and gas use points.
進口內螺紋管道阻火器場合應用:
1、輸送可燃性氣體的管道上。
2、火炬系統。
3、油氣回收系統。
4、加熱爐燃料氣的管網上。
5、氣體凈化通化系統。
6、氣體分析系統。
7、煤礦瓦斯排放系統。
8、乙炔、氫氣系統。
Application of inlet internal thread pipe flame arrester:
1. On the pipeline conveying combustible gas.
2. Flare system.
3. Oil and gas recovery system.
4. Heating furnace fuel gas pipe network.
5. Gas purification system.
6. Gas analysis system.
7. Coal mine gas drainage system.
8. Acetylene and hydrogen system.
進口內螺紋管道阻火器訂貨須知:
A、若訂貨前還未選定型號,請向我們提供您的使用參數:
1.公稱通徑 2.產品型號 3.流體性質(包括公稱壓力、溫度、介質) 4.閥體、密封材料 5.連接方式
B、若已經由設計單位選定我公司的產品型號,請按型號直接向我司銷售部訂購
C、當使用的場合非常重要或管路比較復雜時,請您盡量提供設計圖紙和詳細參數,由我們德國洛克閥門技術員為您審核把關。
D、感謝您訪問我公司的網站〖〗,如有任何疑問.
您可以致電給我們《》我們一定會盡心盡力為您提供優質的服務!
