男人插女人骚视频,波多野结衣人妻厨房大战,亚洲国产精品成人精品无码区,亚洲 欧美 国产 综合首页

樂豐制作 蓄水池模具 水泥蓄水池模具 按要求定做

蓄水池模具屬于大型的鋼模具，是用人工材料修建、具有防滲作用的蓄水設施。因為蓄水池可以修建在地上或者地下，所以蓄水池模具分為敞開式模具和封閉式模具，按形狀特點分為方形和圓形兩種，按建筑材料不同又可分為磚池和混凝土池等等。基本上市場上需要的蓄水池都是采取圓形的生產方式，施工簡單，操作方便。保定樂豐模具廠目前生產的蓄水池模具而言，高度一般達到了3米多高，模具內徑在6-8米之間，而且每套模具分為多塊小模具組合在一起的，這樣的設計就是方便施工。

As a large-scale steel mold, the water storage tank mold is a water storage facility built with artificial materials and has the function of anti-seepage. Because the cistern can be built on the ground or underground, the cistern mold can be divided into open mold and closed mold. According to the shape characteristics, the cistern mold can be divided into square mold and circular mold. According to the different building materials, it can be divided into brick pool and concrete pool, etc. Basically, the reservoirs needed in the market are all round production mode, with simple construction and convenient operation. Baoding permanent mold factory currently produces the water reservoir mold, which is generally more than 3 meters high, the mold inner diameter is between 6-8 meters, and each set of mold is divided into several small molds, so the design is convenient for construction.

蓄水池模具 水泥蓄水池模具  結構特點

開敞式蓄水池池體由池底和池墻兩部分組成，它多是季節性蓄水池，不具備防凍、防蒸發功效。根據地理位置的需求在設計圓形或方形的蓄水池模具，但圓形池結構受力條件好，在相同蓄水量條件下所用建筑材料較省，投資較少。封閉式蓄水池池體大部分設在地面以下，它增加了防凍保溫功效，保溫防凍層厚度設計要根據當地氣候情況和*大動土層深度確定，以保證池水不發生結冰和凍脹破壞，封閉式蓄水池結構復雜，投資比開敞式蓄水池多。

The open type reservoir body is composed of two parts: the bottom and the wall. It is mostly a seasonal reservoir, which does not have the effect of anti freezing and anti evaporation. According to the demand of geographical location, the mold of circular or square reservoir is designed, but the stress condition of circular reservoir structure is good, and the construction materials used under the same storage capacity condition are less, and the investment is less. Most of the closed reservoirs are located below the ground, which increases the effect of anti freezing and heat preservation. The thickness of the anti freezing and heat preservation layer should be determined according to the local climate and the depth of * large dynamic soil layer, so as to ensure that the pool water will not be frozen or damaged by frost heave. The structure of the closed reservoirs is complex and the investment is more than that of the open reservoirs.