男人插女人骚视频,波多野结衣人妻厨房大战,亚洲国产精品成人精品无码区,亚洲 欧美 国产 综合首页

樂豐按需定制 U型流水槽模具 矩形流水槽模具 批發優惠

U型流水槽模具的使用方式只要工人了解后，就可以順利的制作出大量的合格預制件，當然在進行生產的時候，有著固定的使用步驟，不能夠違規使用模具，一定要按照規定的方式去進行模具的操作。在使用模具之前要來進行拼接，并且將模具的尺寸與要求進行比對，一致無誤后便可以進行接下來的一些工序。將預制矩形槽模具需要擦拭干凈，不可以有泥漿的粘連，或者是在邊角處有油污的問題出現，這樣都是不可以進行使用的，臟污的模具會直接的影響到預制件的成型效果，需要將模具徹底擦拭干凈才可以。模具內腔與泥漿接觸的地方需要涂刷好脫模劑，脫模劑的作用是用來隔開模具的泥漿的接觸，自然更加直觀的作用就是加快脫模的作用。預制矩形槽模具在每次生產的時候都要將模具放置在地面上，澆筑上泥漿后使用振動棒插入到里面，在振動的時候氣泡就會慢慢排出。泥漿的表面是需要使用工具進行抹平的，當然也是為了制作出來的預制件更加的光滑美觀。

As long as the workers understand the use of U-shaped flume mold, they can successfully produce a large number of qualified prefabricated parts. Of course, when carrying out production, there are fixed use steps, and it is not allowed to use the mold in violation of regulations. It is necessary to operate the mold in the prescribed way. Before using the mould, the splicing shall be carried out, and the dimension of the mould shall be compared with the requirements, and then the following processes can be carried out after it is consistent. The mould of prefabricated rectangular groove needs to be wiped clean, without mud adhesion, or the problem of oil stain at the corner, so it can not be used. The dirty mould will directly affect the molding effect of the prefabricated parts, and it can only be wiped clean completely. The place where the mold cavity contacts with the mud needs to be coated with mold release agent. The role of mold release agent is to separate the mud contact of the mold. The natural and more intuitive role is to accelerate the role of mold release. The prefabricated rectangular groove mould should be placed on the ground every time it is produced. After pouring the mud, use the vibrating rod to insert it, and the bubbles will be discharged slowly when vibrating. The surface of the slurry needs to be trowelled with tools. Of course, it is also to make the prefabricated parts more smooth and beautiful.

U型流水槽模具工人需要合理進行使用，而且在模具使用完成后也是要進行清理的，對于模具的使用方式是有著固定的，工人不可以隨意的去調整加工方式，當然在進行操作的時候，也要保證好使用方式的正確，不可以出現加工環節錯誤，或者是大量泥漿泄露的問題。在操作的時候要注意好對于混凝土矩型水渠模具的保護，當然也要保證泥漿的正常凝固，需要將模具先來進行組裝，鋼模具都是可以進行組裝拼接的，這是為了讓模具更好的使用，同樣也是為了讓制作出來的預制件更快的進行脫模，在拆模具這個步驟方面，工人不可以去使用扳手或者是其他的工具敲擊模具，本身模具中澆筑上了大量的泥漿就已經受到了很大的壓力，如果隨意去進行模具敲擊的話，就會讓模具容易出現變形的問題，還會影響到后續的使用，導致混凝土矩型水渠模具的加工效果下降，也會影響到這些預制件的成型問題，在拆模的時候需要將螺栓按照順序取下，然后將模具拆開后取出里面的預制件進行灑水養護。

The mould workers of U-shaped flume need to use it reasonably and clean it after using it. There is a fixed way of using the mould. The workers can't adjust the processing way at will. Of course, when operating, they should also ensure the correct way of using, and can't make mistakes in the processing process or leak a lot of mud 。 During the operation, pay attention to the protection of the concrete rectangular channel mold, and of course, ensure the normal solidification of the mud. The mold needs to be assembled first, and the steel mold can be assembled and spliced. This is to make the mold better use, and also to make the prefabricated parts demould faster. In the process of demoulding, the workers do not You can use spanners or other tools to knock on the mold. When a large amount of mud is poured into the mold, it has been under great pressure. If you knock on the mold at will, it will make the mold prone to deformation, and affect the subsequent use, resulting in the decline of the processing effect of the concrete rectangular channel mold, which will also affect the prefabricated parts For the forming problem, it is necessary to take down the bolts in order when removing the mold, and then take out the prefabricated parts in the mold after the mold is disassembled for watering maintenance.